Automobile stereos are extremely well known in modern times, with characteristics like Bluetooth, navigation and built-in DVD changers all being typical options. But a single well known choice is a 2 din car dvd unit. DVD players with Double-din refer to the size of the stereo, with DIN getting a usually sized stereo at 180mm X 50mm, and double din being twice the height of 180mm x 100 mm. This offers you much more screen room to watch a film or adhere to navigation, plus a lot more cars right now have the space to get a double-din stereo. Installing a double-din DVD monitor is not a great deal unique than any other stereo, it's just larger.
But tips on how to set up a 2 din dvd model by oneself? Here're some steps you could follow. Within this case, the project vehicle is a bmw e46 dvd player, however the procedure is similar for other cars as well.
1. Place your foot on the brake pedal, turn the key in the "on" position, and pull the column shifter down for the "1" position. If that's the case equipped, tilt the steering column down also. Pull off the bezel that surrounds the dashboard utilizing your hands, and shot it towards the side. Then, place the automobile back in park and turn off the ignition.
2. Unbolt stereo from the dashboard employing the 1/4-inch ratchet and socket. Unplug the wiring harness in the dashboard plus the antenna lead together with your hands as you happen to be pulling out the stereo. Then, spot the vehicle-specific dash kit into the dashboard making use of a 1/4-inch ratchet and socket and slide the case that comes with all the double-din head unit into the dash kit. Secure the cage for the kit applying the flat head screwdriver to push in the tabs on the cage and pressure fits the cage to the kit.
3. Location the wiring harness that comes together with the double-din stereo subsequently for the vehicle-specific wiring harness. Notice how all of the wiring has the exact same colour coding method, and both of them have labeled wires for each and every lead. You'd like to connect each wire with all the corresponding wire from the similar colour and label on the other harness. To perform this, strip off 1/4 inch of shielding in the end of a wire utilizing the wire strippers. Then, crimp a blue butt connector onto the finish with the wire making use of the wire crimpers. Strip the corresponding lead around the other harness inside the same manner, and crimp it in to the other end of the blue butt connector. Do that for every where in every harness until you will find no more.
Four. Plug the vehicle-specific wiring harness into the dashboard wiring harness, and let the plug in the end to hang out from the cage inside the dash. Then run the antenna lead in the dashboard out the case and plug the GM antenna adapter into the factory antenna lead.
5. Location is the double-din head unit in your proper hand and plug in the wiring harness and antenna lead into the back of the stereo. Then push the stereo in to the dashboard till you hear two clicking sounds, indicating that the stereo has locked itself into the dash cage. Reassemble the bezel in the reverse order of removal.
No comments:
Post a Comment